Teach you how to install the hoist yourself

   It is often referred to winch hoist  hoist equipment   powered by a human or mechanical reels, thus completing the winding rope traction work. And winches can be vertical, horizontal or inclined pull lead weights, the following introduce you how to install the winch.
       To determine the winch brake before installing brake should be flexible and reliable, not wet or sticky dyed oil, if slippage should be promptly adjusted, cleaned. Installation First to note is the anchor windlass and must be firmly connected, the general should be set sun shed. Ensure that the positive and negative direction of rotation winch should start as indicated on the controller. Secondly; if there is a row of  Rope hoist   wire rope should be adjusted so that kept perpendicular to the roll. No row rope winches should be adjusted first guide pulley position, so that the roll axis perpendicular bisector rope and the distance from the drum roll length not kid 20 times. Finally; wire rope on the drum so neat, compact, and prevent the rope squeezed. Jane volumes to be retained on the wire rope of at least four laps. Drum controller should progressively switched on continuously from one side prohibited by "0" point to the other side.