Wire rope electric hoist's some maintenance common sense
Wire rope electric hoist's some maintenance common sense. 1. Pairs of Hoist equipment should be carried out in a timely manner cleaned and Tu in order to lubricating oil or grease, especially those that to bypass the pulley O'clock subjected to bending the site. Brushing lubricants species should be with the wire rope phase to adapt. 2 newly replaced Wire rope hoist should be's wire rope should generally be with the original design the installed wire rope type, specification the same. Such as the use the different types of wire rope, must ensure that the new steel wire rope not less than the of the original-election wire rope the performance of, and with the Reels and on the pulley Slotted-phase to adapt. 3 From the wire rope hoist should be reels or wire rope on a volume drainage wire rope, should be in clean place dilatory, take measures to prevent wire rope bend, kinked or sticky dyed debris, to prevent the the outside world factors on the wire rope's damage, corrosion while the make its performance reduced. Four pairs of electric hoistshould be wire rope should strengthen the Inspection and make records, so that timely accordance with the relevant information timely replacement. Under no circumstances, the absolute shall not use scrapped wire rope. Five use should be avoided electric hoist Ying's two steel wire rope in the cross or laminated state of under the affected by force, rational design of winding system the structure of, as far as possible reduce the wire rope number of bending and to avoid reverse bend, prevent the wire rope knotted, distorting, excessive bending and zoned grind.