The difference with Rope hoist winch

     Lifting The two most common areas of electrical machinery is  Rope hoist  and winch, both of which are used to enhance the vertical, horizontal or inclined pulled cited heavy loads. So hoist and hoist in the end what difference does it  Use Shiyou should pay attention to what  Here to do a full range of summary for your reference:
       First, the hoist and hoist the main differences:
1 Run: electric hoist can lift up and down around the pan, winches only stationary use.
(2) Operating speed: general basic rope lifting speed is 8M / minute, slow winch accessories generally also 10 meters, this is based on the starting weight and the model to decide
3 Lifting height:  wire rope hoist  is generally 6M, 12M, etc., the installation of wire rope is inconvenient because you install it, the entire hoist drum, the volume will change. And you just look at his winch rope capacity, are generally 100M Accessories
4 small Rope hoist, hoist bulky Rope hoist installation requires beam, windlass fixed.
5 Rope hoist generally only done to enhance the use, in addition to enhancing hoist can also traction.
       Second, the use note:
1 after a new installation or installed after dismantling the hoist should first be empty commissioning times. But not before the installation is complete, avoid power test rpm.
2 Do not overload  hoist equipment  use. That exceed the maximum load tonnages.
3 allowed knotted rope winch, twisted around in a pitch of more than 10% broken and should be replaced.
4 Use the process should be careful not to appear to tie. Squashed. Arcing wounded. Chemical erosion of media.
5 shall not directly lifting hot objects, objects for angular to add shield.
6 Use the process should always check the rope used to achieve the standards should be scrapped immediately scrapped.