Group hanging electric hoist operation guide

Group hanging electric hoist lifting when subjected to the following irresistible external influences, there will be loads shake situation. The group hanging electric hoist load sway people and things will be a series of bumps, the load falls and other accidents, and will affect the group hanging electric  chainb lock  trolley running.
Do not lifting loads near the end of the beam side of the state to run. Lifting loads shake or fall will encounter people and things, may result in death or serious injury. Load if shaking, shaking the more powerful, the more difficult the operation of the car, accompanied by danger. In principle, to make the load lateral shake. Therefore, please observe the following.
1, not stayed
2, you need to move laterally, try to slow down, the slow running;
3, do not dramatic lifting loads
4, Do not lifting loads at the side of the state near the end of the beam to run;
Factors because of inertia in starting and stopping traversing the  lever hoist   even if the strict compliance with the operation, the load will vary shaking, proposed as follows.


1: Press the lateral movement by one: key "figure a", run the car begins to move, the load will be slightly delayed "Figure b"
2: In the load before going to swing to a central location, close button once;
3: When the load back to group hanging just below the hoist when the button is pressed again, "drawing c", so that lateral movement in this state.
Starting and stopping group hanging electric hoist lateral movement, even to comply with the above operation,Hoist and trolley lifting loads but also how much will be shaking. At this point, if the following operations will be able to reduce the lifting load sway.