PA mini electric hoist wire rope maintenance skills

1, wearing mini electric Manual hoist  rope pulley, there should be no rupture of its edges and gaps.
2, do not rope in motion relative to the friction and other objects, but should not be dragged steel edge oblique edges, so the edges cut steel wire rope.
     3, in the heat of objects using the rope must be used insulation measures, because after rope subjected to high temperature strength will be greatly reduced.
4, mini electric wire rope winch  during use must always check the strength of their rope, at least six months to conduct a comprehensive inspection or do strength tests.
5, the process of using non-overload should not be affected by the impact force required in bundled or lifting objects, be careful not to make the rope fast mouth directly and objects in contact with sharp edges in place to pad their contact with woodblock , canvas, burlap or other packing material to prevent damage to the object's edges and corners of the mouth rope fast to produce equipment and life accidents.
6, micro  hoist equipment  rope storage, according to the above methods to clean the dirt on the ropes after the Shang Hao lubricants, and then coiled good, stored in a dry place, in order to board underneath the rope or sleepers.
7, in the course, with particular attention to prevent contact with the wire rope and welding wire. Because of hitting power, the rope will be damaged, affecting operations smoothly.
8, note that checks whether the fracture failure situations or need to exchange a new rope, mini electric hoist to ensure safe use.
9, electric hoist in the course, where there is not long enough, you must connect using shackles, wire rope head wear is strictly prohibited methods take a long thin wire rope lifting objects, in order to avoid the resulting shear forces.
10, mini electric hoist in use for some time, the rope must add oil to prevent rusting steel wire rope, wire rope to reduce friction between.